studiomux-aum_effect_loop_setup

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== StudioMux-AUM Effects Loop Setup ======

Sometimes it is preferable to use AUM as a host for your IAA apps and AUv3 rather than the StudioMux app. This article walks you through setting that up.

Main steps (Mac using Ableton Live):
  * Launch the StudioMux server on your desktop device
  * Launch the StudioMux app on your mobile device
  * On the Mac, add the StudioMux Effect Audio Unit as an effect on the track that you want to send to the mobile device for processing 
  * In the StudioMux AudioUnit panel, send the audio to channel 1 of your device and receive from channel 2
  * {{:studiomux_aum_macsetup_0.png?400|Mac Setup}}
  * On the mobile device in the StudioMux app, you should see channel 1 receiving from the Mac and channel 2 sending to the Mac
  * {{:studiomux_aum_macsetup_1.png?400|StudioMux on iPad after Mac setup}}
  * In AUM, add an audio channel strip and set its input to StudioMux Output 1
  * {{:studiomux_aum_macsetup_2.png?400|AUM with input set to StudioMux}}
  * Back in StudioMux, add AUM Port 1 as the the input source for channel 2
  * {{:studiomux_aum_macsetup_6.png?400|AUM Set as input for Channel 2}}
  * Back in AUM, change the destination of the audio channel to StudioMux Out 1.
  * {{:studiomux_aum_macsetup_3.png?400|}}
  * You can now add effects nodes in AUM to process the audio from the Mac.
  * {{:studiomux_aum_macsetup_4.png?400|}}
  * {{:studiomux_aum_macsetup_5.png?400|}}