Differences

This shows you the differences between two versions of the page.

--- playground:adat_connecting_interfaces [2021/02/01 20:18] – arktek
+++ playground:adat_connecting_interfaces [2021/02/01 20:23] (current) – arktek
@@ Line 1: / Line 1: @@
 This page is a summary of how to connect two audio interfaces via ADAT.
@@ Line 14: / Line 16: @@
   - The ADAT clock rate needs to be the same on each audio interface.
   - One ADAT device needs to have their clock source set to internal and the other device needs to have their clock source set to external.
-  - The clock rate in the host device audio software eg AUM, Cubasis etc on the iPad needs to be at the same clock rate as the ADAT clock rate. **This is not automatic. If the clock rate doesn't match between the ADAT clock rate and the DAW clock rate the audio device will still function with the analog ins and outs, but you won't be able to send or receive audio on the ADAT channels even though they will be visible in the DAW.**
+  - The clock rate in the host device audio software eg AUM, Cubasis etc on the iPad needs to be at the same clock rate as the ADAT clock rate. **This is not automatic. If the clock rate of the DAW does not match the ADAT clock rate the audio device will still function with the analog ins and outs, but you won't be able to send or receive audio on the ADAT channels even though they will be visible in the DAW.**
   - Check that the cable connections are set up correctly (eg the IN of one device connects to the OUT of the other device)