Differences

This shows you the differences between two versions of the page.

--- loopy_pro_troubleshooting [2022/01/03 04:55] – created espiegel123
+++ loopy_pro_troubleshooting [2024/02/12 12:37] – espiegel123
@@ Line 3: / Line 3: @@
 This page covers tips for troubleshooting Loopy Pro. If you have not checked Loopy Pro's manual, you may want to start by taking a look at the [[https://loopypro.com/manual/|Loopy Pro Manual]] a link to it is found in Loopy Pro's Help menu.
+===== No Audio Input or Output =====
+See [[loopy_pro:troubleshooting_audio_problems|Loopy Pro: Troubleshooting  Audio Connections]]
 ===== Audio Levels Of Recorded Tracks Seems Too Loud =====
@@ Line 9: / Line 11: @@
 To turn off Echo Cancellation, tap on the mic icon in the mixer to see the input options and turn off Echo Cancellation. If you don't plan on using the mic, you might even want to delete that channel from the mixer.
+===== MIDI Pedal/Learn/Controller Troubleshooting =====
+see: [[loopy_pro:midi_troubleshooting|Loopy Pro: MIDI Troubleshooting]]
+===== MIDI Controlled Effects Not Responding =====
+If you have an AUv3 such as a sampler that responds to MIDI and which is not responding, you may need to turn off idling for that effect. Normally, Loopy puts effects that aren't receiving any audio input to sleep in order to free up CPU. This is called idling. To turn off idling, open the AUv3 window. Long-press on the label that says On, Off, or Idle and turn off //Enable Idle Mode// in the panel that pops up.
+{{tag>loopy_pro}}