loopy_pro_faq

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
loopy_pro_faq [2024/03/05 11:53] espiegel123loopy_pro_faq [2024/03/05 12:08] (current) espiegel123
Line 29: Line 29:
  
 **My audio interface / MIDI controller is often not identified or the connection is not stable.**\\ **My audio interface / MIDI controller is often not identified or the connection is not stable.**\\
 +Audio and MIDI Troubleshooting tips can be found [[loopy_pro_troubleshooting|here]].\\
 To avoid dropouts, make sure that your audio interface has sufficient power. If your audio interface has a separate DC connector, use it. The same goes for your MIDI controllers. Active USB hubs are more stable. Passive USB hubs often cannot supply some audio interfaces and MIDI controllers with sufficient power – a very common problem.\\ To avoid dropouts, make sure that your audio interface has sufficient power. If your audio interface has a separate DC connector, use it. The same goes for your MIDI controllers. Active USB hubs are more stable. Passive USB hubs often cannot supply some audio interfaces and MIDI controllers with sufficient power – a very common problem.\\
 Make sure your audio interface officially works with iOS/iPadOS and if available switch to "Class Compliant" mode.\\ Make sure your audio interface officially works with iOS/iPadOS and if available switch to "Class Compliant" mode.\\
Line 53: Line 54:
 Yes, it is.\\ Yes, it is.\\
  
-**What settings are needed for my Bluetooth Headphones to work?**\\+**What settings are needed for my Bluetooth headphones to work?**\\
 You might need to turn off echo cancellation to enable the Bluetooth option to appear. Open the mixer, then tap the icon for the microphone input, and turn off Echo Cancellation. Then you should be able to connect to your headphones.  You might need to turn off echo cancellation to enable the Bluetooth option to appear. Open the mixer, then tap the icon for the microphone input, and turn off Echo Cancellation. Then you should be able to connect to your headphones. 
  
  
 {{tag>loopy_pro}} {{tag>loopy_pro}}
  • loopy_pro_faq.txt
  • Last modified: 2024/03/05 12:08
  • by espiegel123