Differences

This shows you the differences between two versions of the page.

--- loopy_pro:midi_troubleshooting [2024/03/29 04:23] – add more information for On/Hold... espiegel123
+++ loopy_pro:midi_troubleshooting [2024/04/13 04:31] (current) – espiegel123
@@ Line 26: / Line 26: @@
   * Use a standalone MIDI Monitor to see if your iPad or iPhone is seeing MIDI from the controller.
   * If MIDI is seen, make a note of what messages (and on what channels), your controller is sending
-  * MIDI Learn triggering a clip in Loopy Pro's default document.
+  * MIDI Learn triggering a clip in a new project made from Loopy Pro's default document.
   * If strange things happen when you send a MIDI message you mapped, turn off the **Feedback Enabled** for the controller in Loopy Pro's Control Settings
 ==== Use A MIDI Monitor to See if MIDI Is Received ====
+ of
 Before troubleshooting:
   * Fully shut down your device using "Slide to power off" rather than putting it to sleep at waking it up.
@@ Line 58: / Line 58: @@
   * Launch Loopy Pro
   * Create a new document using Loopy Pro's default document
+  * Choose Clip Settings from the main menu
+  * Scroll to the bottom of the settings panel and choose **Restore Defaults**
+  * In Control Settings, turn off any Global Profiles that are enabled. This step is to ensure there is not some conflict with MIDI bindings that might be interfering.
   * Turn on MIDI Learn mode
   * Tap on the upper-left clip
@@ Line 124: / Line 127: @@
 {{youtube>cqjowyNR4eM?large}}
+===== Check Your MIDI Bindings =====
+If MIDI events are resulting in unexpected behavior and you have turned off MIDI Feedback, look at all of your MIDI Bindings. MIDI Bindings are the mapping of MIDI events to actions. They are listed and can be edited through the Control Settings panel.
+If a particular MIDI event is causing a problem, make a note of what the event is. If you aren't sure, use a MIDI monitor (as described elsewhere on this page) to see what MIDI message is resulting in the unexpected behavior.
+  * Choose Control Settings to display the panel.
+  * Look inside each listed profile.
+  * The MIDI messages that are bound to action are listed in the profiles.
+  * Find the MIDI message and tap on it to view the details of the actions bound to it.
+  * Look through all the profiles in case the same message is mapped in multiple profiles.
 ===== More.... =====